Oil Separators Filters

Part No: 6229046800

Type: Flat multi-hole flange built-in coalescing separator cartridge

Filter Media: Imported HV Borosilicate Micro Glass Fiber composite coalescing media

Filtration Precision: ≤0.1 μm

Separation Efficiency: ≥99.99%

Residual Oil Carry-over: ≤3 ppm

Service Life: 3500–4000 working hours

Max Working Pressure: 0.7–1.3 MPa

Operating Temperature Range: -20℃ ~ 120℃

Initial Pressure Drop: ≤0.02 MPa

Net Weight: 2.3 kg

Dimensions (mm)

Flange Outer Diameter: 210

Cartridge Outer Diameter: 152

Central Inner Hole Diameter: 96

Overall Height: 256

Application Scenarios

Auto repair workshops, small & medium machining factories, plastic injection molding, electronic assembly lines, food packaging processing, small factory central compressed air stations

Product Features

Multi-gradient high-density borosilicate glass fiber media with strong oil mist holding capacity, resisting oil saturation under long-term medium-load continuous operation and maintaining stable separation efficiency.

Uniform deep-pleated low-resistance structure with ultra-low initial pressure drop; differential pressure rises slowly during full-cycle operation to reduce power consumption of medium-small screw compressors effectively.

Double-layer perforated galvanized anti-static inner & outer support cages, anti-corrosion and pressure-fluctuation resistant, no filter media collapse under long-running full load. Anti-static design eliminates static ignition risks in oil mist environment.

Standard 210mm multi-hole flat steel flange with mounting holes fully consistent with original oil separator tank. Matched high-temperature composite gasket ensures reliable sealing under drastic day-night temperature changes, preventing oil bypass and excessive residual oil in compressed air.

Product Description

It adopts high-efficiency gradient glass fiber coalescing technology to capture micron-scale lubricant aerosol mixed in compressed air, limiting outlet residual oil content below 3 ppm. Separated lubricant flows back to the compressor main unit through the central return tube for circulation, greatly cutting lubricant oil consumption.

It delivers full protection for downstream refrigerated dryers, adsorption dryers, precision pneumatic components and air transmission pipelines, extending maintenance cycle and overall service life of the whole compressor unit and supporting post-processing equipment.